Air Mobility Command · Travis AFB, CA · posted Nov 17, 2026
SAFETY AND OCCUPATIONAL HEALTH MANAGER
$83K to $108K a year
Apply on Air Mobility Command's site ↗
See how well your resume fits this kind of role
Upload once for an instant match analysis. Free, about a minute. Full matches on screen before any signup.
Check my resumeThe role
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: To perform work in a broad range of occupational safety program elements, such as inspections/surveys, assessments, evaluations, mishap investigations, and safety training.
Performs a broad range of safety and occupational health duties in one or more areas of safety and occupational health. Performs periodic inspections, assessments and evaluations on numerous programs such as high-risk activity programs, supervisory safety training, and emergency/disaster preparedness to determine compliance with appropriate safety and occupational health regulations. Plans and carries out formal investigations of reportable and non-reportable mishaps involving personal injury accidents, property damage, covering a wide range of work operations.
Assigned area involves a substantial number and diversity of hazards that may cause mishaps with significant severity and loss. Serves as the investigation officer for formal mishap investigations such as Safety Investigation Boards (SIB) involving class A and B mishaps. Obtains statements from witnesses, photographs mishap scene, records circumstances of mishap and extent of injuries, estimates cost of property damage, and prepares a formal report of findings with proposed recommendations and abatement dates to correct the unsafe acts/conditions.
Develops specialized operating practices, modifying or departing significantly from standard techniques when necessary based on interpretation of policies, standards, and regulations. Coordinates with other installation offices regarding safety matters affecting installation personnel and devises specialized operating practices involving diverse but recognized hazards. Prepares and/or revises standard local safety instructions and guides such as local supervisory safety guide, and unit safety representative guide that are relevant to base employees and current or planned contractor operations.
Reviews plans and specifications for new construction, major building alterations, and/or changes in installation equipment and monitors project through completion to ensure compliance with safety codes and standards. Recommends design changes not included in the original plan and provides technical recommendations to eliminate or control safety hazards in the repair and maintenance of installation facilities and equipment.
Provides technical safety training/instruction to supervisors, employees, and/or unit safety representatives on a wide range of work operations areas, such as traffic safety techniques, proper storage of hazardous materials, common laboratory hazards, and building evacuation procedures. Prepares and uses a wide variety of formal training materials, such as outlines, handouts, publications, films, exhibits, protective devices, and visual aids to provide and/or reinforce information related to safe work practices, accident prevention techniques, and mishap reporting requirements.
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Administrative and Management Positions.
Basic Requirement Or Individual Occupational Requirement
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements. Click on the following link to view occupational requirements for this position. https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0000/safety-and-occupational-health-management-series-0018/ SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems.
Examples of specialized experience includes managing safety or occupational health program elements; developing and recommending safety and occupational health policy to higher levels of management; applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements; developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards; developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses; analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards; designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards; and inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards.
NOTE: You must submit copies of your college transcripts.
Or Education
a Ph.D or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position. NOTE: You must submit copies of your college transcripts.
Or Combination Of Experience And Education
more than 2 years of graduate level education with a major or subject area related to the position to be filled. Therefore, I have a combination of experience and education. Note: You must submit copies of your college transcripts. FEDERAL TIME-IN-GRADE (TIG)
Requirement For General Schedule (Gs) Positions
Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of numerous established safety and occupational health principles, practices, procedures, laws, regulations, and current legislative issues as they relate to the military installation occupational safety program; the requirements, methods, and techniques of accident and mishap investigation, analysis, resolution of normal occupational safety problems/health risks, and formal reporting procedures; and risk assessment methods and techniques for evaluating normal safety and occupational health risks. 2.
Knowledge of communication techniques, principles, and regulations to communicate effectively, both orally and in writing, in responding to work related problems and questions. 3. Knowledge of basic construction standards, methods, practices, techniques, materials, and equipment to determine compliance with regulations and standards. 4. Knowledge of standard training techniques, methods, and materials sufficient to prepare and present formal training and instructional sessions. 5.
Skill in the interpretation of engineering drawings and specifications sufficient to identify hazardous conditions in proposed facilities. 6. Ability to plan, organize work, and meet deadlines. Other significant facts pertaining to this position are: 1. Work may occasionally require travel away from the normal duty station on military or commercial aircraft/vehicle to conferences, meetings, or functions away from the duty office/location.
Travel may include overnight stays. 2. Incumbent may occasionally be required to be in an on-call status outside normal duty hours or on holidays. 3. May occasionally be required to work other than normal duty hours and/or Shift work may be required which may include overtime and/or irregular hours. 4. Must be able to obtain and maintain a Secret security clearance. 5. The work requires the employee to drive a motor vehicle.
An appropriate, valid driver's license is required for the position. 6. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
Part-Time Or Unpaid Experience
Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
Volunteer Work Experience
Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
How to find jobs that match your skills
From Air Mobility Command's own posting, as listed in Seeker's index. Seeker is not the employer and doesn't take applications; the apply link opens the employer's site.