Skip to content

Air National Guard Units · Garden City, GA · posted Nov 17, 2026

ELECTRONIC INTEGRATED SYS MECHANIC - TITLE 32

$36 to $42 an hour

Apply on Air National Guard Units's site ↗

See how well your resume fits this kind of role

Upload once for an instant match analysis. Free, about a minute. Full matches on screen before any signup.

Check my resume

The role

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. These two positions are for an Electronic Integrated Systems Mechanic, Position Description Number D2240P01, located at the 165th Airlift Wing, Garden City, Georgia. This is a full-time, Excepted Permanent, dual status position which requires Georgia Air National Guard Membership. Area of Consideration: Open to current Air DSG members in the 165th Airlift Wing of the Georgia Air National Guard.

As an Electronic Integrated Systems Mechanic, WG-2610-13, you will: Perform scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Complete operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolate unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS).

Solve complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjust and align system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Install serviceable components into aircraft and perform total systems alignment and harmonization in accordance with existing technical orders and directives.

Accomplish technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintain, modify, calibrate and inspect a wide variety of user test, measurement, and diagnostic equipment (TMDE). Install, modify, overhaul, maintain, troubleshoot, repair, rebuild, align, and calibrate complete electronic avionics multi-systems control. Demonstrate a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN).

Evaluate operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyze the malfunctions encountered through fault codes, determine repair sequence process and perform the repairs. Review and analyze maintenance data; determine if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devise and recommend tests, procedural changes, or data corrections.

Align, adjust, and perform final calibrations on integrated systems to determine successful repairs. Analyze equipment failure and malfunctions and suggest changes to improve operation. Monitor the operation of complex, interrelated systems, analyze operating trends, propose preventative maintenance down time to assure continued operating capability, and recommend components for overhaul or engineering evaluation for disposal.

Apply technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Use algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Install, operate, and repair prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned.

Advise Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Interact directly with aircrews for mission/sortie debrief and enhanced system troubleshooting. Troubleshoot operational malfunctions and analyze system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests.

Perform on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinate back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Use a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.

Perform other duties as assigned.

Each applicant must fully substantiate (in her/his own words) that they meet the requirements of the specialized experience listed below; otherwise, the applicant will be considered unqualified for this vacancy. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. IF YOU DO THIS YOU WILL BE CONSIDERED UNQUALIFIED FOR THE VACANCY. Please ensure that you have included beginning and ending dates (month and year) for all jobs listed on your resume.

Military Grades: E4 - E5 Compatible Military Assignments: AFSC: 2A8XX, 2A9X4 General Experience: Candidate must possess experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes; ability to collect and analyze data effectively, efficiently, and accurately; ability to apply procedures and directives by reading and interpreting material; ability to communicate clearly and effectively; and applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.

Specialized Experience: Candidate must have 18 months specialized experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops; the ability to apply comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications; ability to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction; extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications; broad knowledge of the interactions among a number of closely integrated complex systems; knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc.; ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex; ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units; perform on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.

How to find jobs that match your skills

From Air National Guard Units's own posting, as listed in Seeker's index. Seeker is not the employer and doesn't take applications; the apply link opens the employer's site.